Dexis platinum sensor instruction for use

#Dexis platinum sensor instruction for use update#

For ASCII mode, date format is 7Bits,Р”В®ven, 1 stop bit (7 E 1). Yes (CR#2~CR#5 may be set and the range is K1~K4096) There is no isolation betweenР”СћРІР‚в„ўs complement of 16-bit, (13 Significant Bits) Isolation between digital and analog circuitry. Extension hole of the extension unit mounting PT: Platinum temperature sensors (PT-100)Р”В¦. The input resolution for Centigrade is 0.1 degrees and for Fahrenheit is 0.18 degrees. The DVP04TC-S works with both Centigrade and Fahrenheit. Power supply and main processing units are sold separately.

#Dexis platinum sensor instruction for use update#

There are 49 CR (Control Register) in each module and 16 bits for each register.Р”ВVP04TC-S thermocouple sensor can update software version by RS-485. The DVP04TC-S series can read/write the data by using instructions FROM / TO via DVP-PLC SS/SA/SX/SC MPU program. The DVP04TC-S allows the connection of four thermocouple sensors (Type J/K). Thank you for choosing DELTAРІР‚в„ўs DVP Series PLC. Make sure that the DVP04TC-S is properly grounded, to avoid any electromagnetic noise. Check all the wiring prior to power up.Р”Вo NOT touch internal circuit within 1 minute after power is OFF. Also, it is equipped with protective methods such as some special tools or keys to open the enclosure, in order to prevent hazard to users or damage the PLC.Р”Вo NOT connect the AC main circuit power supply to any of the input/output terminals, or it may damage the PLC. The PLC should be kept in an enclosure away from airborne dust, humidity, electric shock risk and vibration.

Make sure that power is OFF before wiring. Always read this instruction thoroughly before using the DVP04TC-S.